Publicidad
Idiomas disponibles
Idiomas disponibles
4. OPERATION PROCEDURES
Operation Procedure
1. Turn ON (|) power
Fwd
R ev
2. Set rotation speed
Fwd
Rev
②
3. Start operation
Fwd
R ev
Press 1 sec to start
① Press the Power key.
AutoR
Sync
①
① Press the C
② Set desired speed by turning the
AutoR
Sync
③ Press the
②
①
③
<To stop>
AutoR
Sync
Speed setting can also be changed during operation.
RPM display: shows software version at start up, then
shows current rpm.
Indicator lamp: One of the Fwd/Rev/AutoR lamps
illuminates according to operation mode at the time of
last power OFF (○).
ontrol knob
RPM display: Shows speed setting, flashing.
Speed setting range: 5-315 rpm
Turning the
Control knob
the value by 1, turning it quickly changes the value by
10.
Control knob
RPM display: Shows current rpm.
indicates flashing.
Press and hold
Run/Stop lamp: ON
Press
again.
Run/Stop lamp: OFF
21
.
Control knob
slowly increases or decreases
to finalize.
for one second.
.
Publicidad
