KNF Yamato RE212-G Manual De Instrucciones página 96

2. COMPONENT NAMES AND FUNCTIONS
Control Unit
①
⑦
⑥
④
③
No. Panel item
① RPM display
② Power key
Run/Stop key
③
Run/Stop lamp
④
⑤ Control knob
Fwd lamp
⑥
Rev lamp
⑦
AutoR lamp
⑧
Sync lamp
⑨
Display Characters
All characters displayed when making settings are defined as follows
Character Letters
Fwd Rev
⑤
Shows rotation speed reading and setting, and each
parameter.
Press to turn ON (|) or OFF (○) power.
Press to start or stop rotation.
Illuminates during operation.
Turn to increase or decrease set value, scroll items in user
setting, and press to switch or finalize settings.
Forward lamp; illuminates in forward rotation mode
Reverse lamp; illuminates in reverse rotation mode
Auto Rotation lamp; illuminates in auto inversion mode
Synchro lamp; not used for this unit.
Indicates rotation mode setting.
rot
See "Rotation Modes" (P. 23)
Indicates time setting for automatic inversion.
SEC
See "Timed Auto Inversion Mode" (P. 24)
Indicates setting of the behavior of unit at power loss restoration.
Pon
See "Auto-resume Function" (P.25)
Indicates LED brightness setting.
dSP
See "LED Brightness Setting" (P.26)
AutoR Sync
Description
Description
10
⑧
⑨
②
DE
EN
FR
ES
IT