KNF Yamato RE212-G Manual De Instrucciones página 144

2. COMPONENT NAMES AND FUNCTIONS
Control Panel
④
No. Panel item
Temperature display
①
Up key
②
Down key
③
Run/Stop key
④
Run/Stop lamp
⑤
Set key
⑥
Heater lamp
⑦
Synchro lamp
⑧
Display Characters
All characters displayed when making settings and during operation are defined as follows:
Character Letters
①
③
⑤
Shows current temperature, temperature setting, and
items in user setting.
Press to increase or decrease set value, scroll items in
user setting, and switch settings.
Press to start or stop an operation. Press one second to
start operation, pressing it while unit is running will stop
operation.
Illuminates during operation.
Press to switch screen between temperature reading and
temperature setting.
Press and hold to switch screen to user setting.
Illuminates when heater is on and drawing power.
Not used for this unit.
Appears while entering offset temperature values.
CAL
See "Calibration Offset" (P.17)
Appears when setting Auto-resume function.
See "Auto-resume Function" (P.18)
Pon
Overshoot alert
See "Overshoot Alert" (P.19)
tAH
Appears when setting LED brightness.
See "LED Brightness Setting" (P.20)
dSP
② ⑦
⑧
⑥
Description
Description
9
DE
EN
FR
ES
IT