Publicidad
Idiomas disponibles
Idiomas disponibles
4. OPERATION PROCEDURES
LED Brightness Setting
Change the LED brightness of the control panel.
The brightness can be set in 8 levels from 0 to 7.
Default setting is "3"
Setting change can be made during standby only.
1 Enter user setting
2 Select the LED brightness level
①
①
③
③
3 Exit use setting
Press 4 sec.
②
④
Press 2 sec.
Turn power ON (|) and press
while temperature reading is on the screen.
Unit enters user setting.
1. Select "dSP" using the ∧∨ keys.
Temperature display: "dSP" flashes.
2. Press
key.
Temperature display: Current set value flashes.
3. Use the ∧∨ keys to alter the setting.
4. Press
key to finalize.
Temperature display: Set value is shown for about one
After completion, the screen returns to step 1.
After completing the setting, press and hold
for two seconds. Display reverts to initial screen and
shows temperature reading.
20
key for four seconds
second.
key
Publicidad
