Publicidad
Idiomas disponibles
Idiomas disponibles
Routine First Maintenance Inspection
The maintenance for the first 1000km is the most
important maintenance work for the motorcycle. All
adjustments should be done well, all fasteners
should be tightened, and the dirty engine oil should
be replaced. Prompt maintenance for 1000km will
ensure long engine life and performance.
Caution
1000km maintenance shall be carried out accord-
ing to the method described in the periodic mainte-
nance section of this driving manual. The Cautions
and Warnings in the Service section should be
noted.
Special note:
After the initial running-in to 1000km, please entrust
the local QJMOTOR dealer service station to
replace the oil filter, replace the oil, clean the filter
screen, etc. (The subsequent maintenance mileage
requirements shall be implemented according to the
"Maintenance Mileage Table"). At the same time, the
oil level should be checked frequently. If it is neces-
sary to add oil, the special engine oil or the engine oil
specified in this manual should be added.
Pre-driving Inspection
Before driving a motorcycle, always check the
following. The importance of these checks must not
be overlooked. All the inspection items should be
completed before driving.
Check the
contents
1 Smooth rotation
2) Flexible rotation
Steering handle
3) It shall be free from axial play and
looseness
1) Handle and brake pedal have
correct play
Braking
2) No spongy feeling of poor braking
3) No oil leakage
1) Correct tire pressure
Tire
2) Proper tread depth
3) No cracks or wounds
Sufficient fuel stock to cover the
Fuel level
planned distance
27
Check the key points
Publicidad
