Switches - Scotsman C1448R Manual De Instalación

C1448, C1848, C2148
Remote Condenser Models - Installation Manual

Switches

There is front access two switches – on and off.
Status De-Scale
Power Water
To switch the machine OFF, push and release the
Off button. The machine will shut off at the end of
the next cycle.
To switch the machine ON, push and release the
On button. The machine will go through a start up
process and then resume ice making.
Control Options
There are two optional, field installed controls that
can be on this machine.
•
KVS Adjustable ice level control
•
KSB Advanced Feature control
Off
On
June 2007
Page 18
Adjustable ice level control
When this option is present there is an adjustment
post and an additional indicator light to the right of
the four indicator lights mentioned above. They are
all visible under the flip-up door. The ultrasonic ice
level control allows the user to control the point that
the ice machine will stop making ice before the bin
or dispenser is full. Reasons for this include:
•
Seasonal changes in ice used
•
Planning to sanitize the bin
•
Faster turnover for fresher ice
•
Certain dispenser applications where
maximum ice level is not desired
Use of adjustable ice level control
Vari-Smart Control Area
There are several positions the ice level can be set
to, including Off (knob and label indicators lined
up), where it fills the bin until the standard bin
control shuts the machine off. See the kit's
instructions for complete details.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it
shuts off the indicator light next to the adjustment
post will be On.
Note: Ice will build up in the bin or dispenser at an
angle, the distances listed above will be from the
sensor to the top of the ice directly beneath it.
The actual distance between the highest point of
the ice may be closer or further away, depending
upon the angle of the ice.
Bin
Full
Adjust Ice Level
02-4294-01 Rev. A.