Key Automation ALT3KF Instrucciones Y Advertencias Para Su Instalación Y Uso página 44

EN
6.8 - Learning a transmitter
A transmitter can be memorized via the specific programming menu or by remote memorisation, using a previously memorised transmitter.
MEMORISING A REMOTE CONTROL
If you are in programming mode exit pressing the
(DOWN-RADIO) button for more than 2 seconds. Until the display shows the word
release the button
1. Press and release the
be selected: once for function STEP BY STEP (
and three times BISTABLE OPEN for function (OPEN and disable the autoreclosure timers, for close the
barrier press again)
2. The KEY LED will flash a number of times equal to the number of the function selected, with 1 second pauses
between flashes
3. Press the back key of the remote control to be memorized and then press the front key within 7 seconds
4. If the memorization has been successful, the KEY LED will give one long flash
5. To memorize another remote control on the same function, repeat point 3
N.B If no commands are given for 7 seconds, the receiver automatically quits the programming mode
DELETING A REMOTE CONTROL
If you are in programming mode, press the
(DOWN-RADIO) button for more than 2 seconds. Until the display shows the word
release the button
1. Press the (DOWN-RADIO) button until the LED lights up (about 3 seconds), then release the button
2. Within 7 seconds press the button of the remote control to be deleted, holding it down until the KEY LED goes
out. Release the remote control button
3. About 1 second after the button is released, the KEY LED starts to flash
4. Confirm the deletion by pressing the
5. If the deletion has been successful, KEY LED will give one long flash
N.B If no commands are given for 7 seconds, the receiver automatically quits the programming mode
CLEARING THE ENTIRE RECEIVER MEMORY
If you are in programming mode, press the
(DOWN-RADIO) button for more than 2 seconds. Until the display shows the word
release the button
1. Press the (DOWN-RADIO) button and hold it down until the LED lights up (about 3 seconds) and then goes
out (about 3 seconds). Release the button.
2. About 1 second after the button is released, the KEY LED starts to flash
3. Press the (DOWN-RADIO) button as the LED flashes for the third time
4. If the deletion has been successful, the KEY LED will give one long flash
44
(MENU) button until
(DOWN-RADIO) button a number of times equal to the number of the function to
(MENU) button to exit until
(DOWN-RADIO) button
(MENU) button to exit until
appears. Press the
), twice for function ONLY OPEN (
appears. Press the
appears. Press the
(radio), then
'
)
+
+1s
(radio), then
'
►
(<3s) ->
►
3s
(1s) +
(radio), then
'
(>3s)->
(1s)+
+
+1s
3s
(1s) +
3s
(>3s)->
(1s)+
3s