Publicidad
Idiomas disponibles
Idiomas disponibles
condition.
ABS lamp is on (not flashing), indicating that ABS is
in the diagnosis state.
If the ABS lamp is off, it indicates that the ABS is in
normal operation.
Flashing of ABS lamp indicates that ABS is not
working (or faulty).
If it is found that the ABS indicator keeps flashing, it
indicates that the ABS is not working. Please check
whether the ABS connector is installed in place and
whether the clearance between the ABS wheel
speed sensor and the gear ring is within the range of
0.5 ~ 1.5mm.
If the ABS wheel speed sensor is damaged, the ABS
indicator on the instrument panel will flash and the
ABS will not work. As the ABS wheel speed sensor
has certain magnetism, it may absorb some metal
substances. Please keep the ABS wheel speed
sensor clean and free of foreign matters. Adhesion
of foreign matters may cause damage to the ABS
wheel speed sensor.
For ABS system failure, please contact the local
QJMOTOR service station for repair.
Storage Guide
Storage
If the motorcycle is to be stored for a long time,
certain maintenance measures should be taken to
reduce the impact of long-term storage on its quality.
1. Change the engine oil.
2. Lubricate the drive chain.
3. Drain the fuel tank and fuel injection unit as much
as possible.
Note
Gasoline stored in the tank for a long time will
56
Publicidad
