QJMOTOR SRT 550 Manual Del Usuario página 30

of the seat cushion into the seat cushion fixing groove ⑧;
align ⑨ on both sides of the seat cushion with ⑩ and
press it down, the screw hole ⑩ corresponds to the hole
⑨, install the fixing screw, and then the driver's seat
cushion can be installed.
● Front shock absorber
Clockwise rotation of
slotted screwdriver (H
Direction) Right and left
shock absorber knobs,
reset resistance
The force increases and the restoring damping force
decreases for counterclockwise rotation (S direction).
Adjust the left and right shock absorbers to the same
damping force level.
Factory adjustment is 2 turns (use a slotted
screwdriver to adjust the adjusting bolt clockwise (H
direction) to the maximum limit, and then rotate it
back (S direction) for 2 turns.
Shock absorption adjustment requires professional
skills. Please contact the local QJMOTOR service
station to adjust the shock absorption. Private
adjustment may cause safety accidents due to
uncoordinated adjustment.
When the adjuster is rotated to the limit position,
Right
Left
please do not continue to rotate in this direction,
otherwise the shock absorber will be damaged.
● Rear shock absorber
The rear shock absorber of this
vehicle
damping spring and hydraulic damper,
which can be adjusted according to
various
preference, vehicle load bearing and road conditions.
24
Warning
is mainly composed
factors such as driver's
of