Sun ECK NEXT 2020 Manual De Instrucciones página 32

QUICKSETUP
The first time the machine is used, a quicksetup guide appears: the operator is guided through
the steps described at the start of the PRELIMINARY OPERATIONS section. The quicksetup
can also be found in the SETUP MENU, select QUICKSETUP. The following screen is
displayed:
Press ENTER to proceed with QUICKSETUP, the user will be guided through the following
steps:
• Language
• Measure units
• License plate recording
• Date and time
• Setup header print
• Vacuum settings
• Leak check test
• Tank filling
Follow the instructions displayed. At the end of the procedure, press ENTER to print a summary
report of the guided procedure. Press ESC to exit.
NOTE: If the guided procedure is not completed, it will be displayed again the next time the
machine is switched on.
NOTE: To display the QUICKSETUP at any time, select from the menu of the same name under
SETUP.
INSTRUCTIONS MANUAL
DD/MM/YY XX:XX PM
QUICKSETUP
ECK NEXT
QUICKSETUP
Press ENTER to continue
Press ESC to exit
-31-
ESC
ENTER