INSTRUCTIONS MANUAL
NOTE: For most systems the quantity of fluid to be refilled is indicated on a plate that is in the
vehicle's engine compartment. If this quantity is not known, look for it in the relevant manuals.
0 g
Select the CHARGE AMOUNT quantity field,
see the keypad on the display to enter the
amount (in grams) of REFRIGERANT that will be loaded into the A / C system.
NOTE: If DATABASE is installed, can be used to insert the value of refrigerant into the GAS
FILLING field.
NOTE: if gas filling is lower than 100 grams the following popup warning will be displayed:
DD/MM/YY XX:XX PM
Charge amount
Less than 100g/4oz
Or unavailable quantity requested
Press ENTER to continue
ENTER
Gas filling lower than 100 grams is not allowed, press ENTER then digit an higher amount of gas
filling.
0 ml
Select the OIL quantity field,
see the keypad on the display to enter the amount (in
grams) of OIL that will be loaded into the A / C system.
-46-