Publicidad
Idiomas disponibles
Idiomas disponibles
The oil must be added through the hole in which the oil cap was lodged by using a proper funnel
(ref 5, Fig.21).
Add oil a little at a time, waiting for the level to rise before each successive addition, until the oil
level is about ½ cm above the red mark on the indicator (ref 3, Fig.21).
Replace the filling cap and tighten down.
INSTRUCTIONS MANUAL
Refill vacuum pump with new oil
To the center of the control glass
Then replace filling cap.
When done press ENTER to exit.
5
MAX
MIN
-68-
DD/MM/YY XX:XX PM
ENTER
3
FIG. 21
TOOLS:
• Funn
el
• Disp
osal
cont
ainer
• Alle
n
wren
ch n°
5; 8.
Publicidad
