Sun ECK NEXT 2020 Manual De Instrucciones página 51

A summary of the amount oil and gas of the OIL INJECTION phase is displayed.
Press the symbol
OIL INJECTION procedure completed successfully, press ENTER to return to the manual
procedure page.
CHARGE
From the MANUAL PROCEDURE, select CHARGE, the following screen will be displayed:
NOTE: For most systems the quantity of fluid to be refilled is indicated on a plate that is in the
vehicle's engine compartment. If this quantity is not known, look for it in the relevant manuals.
Select the CHARGE AMOUNT quantity field,
amount (in grams) of REFRIGERANT that will be loaded into the A / C system.
NOTE: If DATABASE is installed, can be used to insert the value of refrigerant into the GAS
FILLING field.
NOTE: if gas filling is lower than 100 grams the following popup warning will be displayed:
INSTRUCTIONS MANUAL
END of procedure
Oil recovered: 20 ml
Gas charged:
Press ENTER to continue
for printing.
CHARGE
CHARGE AMOUNT
DD/MM/YY XX:XX PM
200 g
ENTER
DD/MM/YY XX:XX PM
ESC
0g
ENTER
0 ml
see the keypad on the display to enter the
-50-