Sun ECK NEXT 2020 Manual De Instrucciones página 33

INSTRUCTIONS MANUAL
AUTOMATIC PROCEDURE
In the automatic mode, all the operations are performed automatically: recovery and recycling,
oil discharge, vacuum, new oil reintegration, and charging. The values for the quantity of gas
recovered, quantity of oil recovered, vacuum time, quantity of oil reintegrated, and quantity of
gas charged into the system are displayed and printed (optional) at the end of each single
operation.
Connect the hoses to the A/C system with the quick-connect couplings bearing in mind that
BLUE must be connected to the low-pressure side and RED to high pressure. If the A/C system
is equipped with a single quick-connect coupling for high or low pressure, connect only the
relative hose.
From the MAIN MENU:
Select the AUTOMATIC PROCEDURE , the following screen is displayed:
DD/MM/YY XX:XX PM
AUTOMATIC
0g
CHARGE AMOUNT
ESC
AUTO
0ml
OIL
DATABASE
2
VACUUM TIME
ENTER
min
EDIT GAS FILLING DATA:
NOTE: For most systems the quantity of fluid to be refilled is indicated on a plate that is in the
vehicle's engine compartment. If this quantity is not known, look for it in the relevant manuals.
0g
Select CHARGE AMOUNT , then use the touchscreen keys 0 to 9 to type the quantity (in
grams) of refrigerant to be charged into the A/C system.
DD/MM/YY XX:XX PM
AUTOMATIC
0g
CHARGE AMOUNT
ESC
AUTO
0ml
OIL
DATABASE
2
min
VACUUM TIME
ENTER
-32-