Subsequently the machine will proceed with the quantity of gas set
You will be asked if we want to proceed with a pressure control of the AC system.
Pressing ENTER to access the test while with ESC the procedure ends.
Unscrew LP coupling disconnect from A/C system end press ENTER to continue:
Close HP and LP valves and press ENTER
Start A/C system and check the manometers and press ENTER
INSTRUCTIONS MANUAL
Do you want check the pressures?
Press ENTER to continue
Or press ESC to exit.
CHARGE
Close HP and LP valves
CHARGE
Start A/C system
and check the manometers
-48-
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
ENTER