3-SAFETY
WARNING! Top driving belts.
Never touch the running belt with your hands.
Serious injury may occur.
3.8
RECOMMENDATIONS AND MEASURES TO PREVENT OTHER HAZARDS WHICH CANNOT BE ELIMI-
NATED
The operator must stay on the working position shown on paragraph 12.1. He must never touch the running dri-
ving belts or put his hands inside any cavity.
The box must be fed by keeping the hands in the right position. (see paragraph 4.9)
The operator must pay attention to the blades during the tape replacement.
3.9
PERSONAL SAFETY MEASURES
(Safety glasses, safety gloves, safety helmet, safety shoes, air filters, ear muffs).
None is required, except when recommended by the user.
3.10 PREDICTABLE ACTIONS WHICH ARE
INCORRECT AND NOT ALLOWED
- Never try to stop or hold the box while it is being driven by the belts.
Use only the EMERGENCY STOP BUTTON.
- Never work without the safety protections.
- Never remove or disable the safety devices.
- Only authorised personnel should be allowed to carry out the adjustments, repairs or maintenance which re
quire operation with reduced safety protections. During such operations, access to the machine must be re
stricted. When the work is finished, the safety protections must immediately be reactivated.
- The cleaning and maintenance operations must be performed after disconnecting the electric power.
- Clean the machine using only dry clothes or light detergents. Do not use solvents, petrols etc.
- Do not modify the machine or any part of it. The manufacturer will not be responsible for any modifications.
- We advise to apply directly to Siat for modifications.
- Follow carefully the installation instructions of this manual. The manufacturer will notbe responsible for dama
ges caused by improper installation.
January 2007
61
ENGLISH