M.J. MALLIS GROUP SIAT S2-S Manual De Instrucciones Y Recambios página 83

11-SET-UP AND ADJUSTMENTS
11.8 ADJUSTMENT OF THE TOP FLAP COMPRESSION
ROLLERS
Approach the rollers to the carton and tighten the knobs.
SPECIAL ADJUSTMENTS
11.9 CHANGE OF THE TAPE LEG LENGTH
The tape leg length can vary from 70 to 50 to 30 mm. To adjust the tape leg
length refer to the manual of the K12 taping unit, supplied with the machine.
11.10 COLUMN EXTENSION (OPTIONAL) AS82
Remove the taping head from its housing.
Position a wooden box or metal case on the conveyor bed.
Lower the top group using the crank until it reaches the support.
Remove the four screws of the upper cover of the column (handle
side).
January 2007 83
ENGLISH