Publicidad
Idiomas disponibles
Idiomas disponibles
12-OPERATION
12.1 OPERATOR'S CORRECT WORKING POSITION
12.2 STARTING THE MACHINE
Push the main switch ON.
12.3 STARTING PRODUCION
After having adjusted the machine according to the box dimensions (height-width), let the machine idle for a
while and check its safety devices (see section 12.8). Then start the working cycle.
12.4 TAPE REPLACEMENT
Be careful with the blades !
Skill 1 operator
When needed, replace the tape roll, as follows:
-Press the LOCKABLE EMERGENCY STOP BUTTON;
-Repeat all the operations shown in sections 11.1 and/or 11.2
12.5 BOX SIZE ADJUSTMENT
Repeat all the operations shown in sections
11.6, 11.7, 11.8
12.6 CLEANING
Before carrying out any cleaning or maintenance operation stop the
machine by pressing the OFF button on the main switch.
Disconnect the electric power.
CLEANING - Skill 1 operator
Use dry clothes or light detergents.
Do not use solvents or water jets.
January 2007
87
ENGLISH
Publicidad
