MSW Motor Technics MSW-GE 4800 KEY Manual De Instrucciones página 35

NOTE: keeping the START button pushed too long and therefore running
the starter while the engine does not fire up can weaken the battery and
damage the electric starter.
e) Let the running engine work on the choke for about 1-3 minutes to reach
operating temperature.
f) After warming up the engine, turn off the choke (smoothly set the choke
valve to the open position - to the right).
3.3.3 Turning the engine off
a) Turn the ignition switch to the "OFF" position - this will turn off the engine
or (only on chosen models) press the STOP button on the electric starter
panel.
b) Close the fuel valve - set its lever in the opposite position to the indication
under the pictogram.
NOTE: in exceptional circumstances - e.g. ignition switch failure - the
engine can be turned off by closing the fuel valve, but do not use this
method as an normal shut off procedure.
3.3.4 Transport / Storage
• If the equipment is not to be used again, cool it down completely before
transporting. For transport, it is advisable to empty the fuel tank to
prevent any fuel leakage during it.
If the unit is not used for a period of 1-2 months, empty the fuel from the
•
tank or pour fresh fuel and add stabilizer to it. If the device will not be
used for more than a few months, the carburetor should be drained of
fuel (by unscrewing the rain tank) and the oil should be drained from the
engine.
IMPORTANT: Do not keep fuel with stabilizer in the tank longer than
recommended by the manufacturer of the stabilizing additive.
3.4.
Cleaning and maintenance
3.4.1 SERVICE INTERVALS TABLE
Interv
Action↓
al→
Control
Engin
Replacemen
e oil
t
EN
After 1
month or
Dail
20
y
operating
hours
x
x
Every six
Every 3
months
months or
or
50 working
operating
hours
hours
Every year
or after 300
100
operating
hours