Foreword; Product Description; Design; Function - Ottobock C-Leg 3C98-3 Instrucciones De Uso

1 Foreword

INFORMATION
Last update: 2015-03-05
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the product.
Receive instruction in the correct and safe use of the product by qualified personnel.
►
► Please contact the qualified personnel if you have questions about the product
(e.g. regarding the start-up, use, maintenance, unexpected operating behaviour or cir­
cumstances). Contact information can be found on the back page.
► Please keep this document in a safe place.
The product "C-Leg" is called the product/prosthesis/knee joint/component in the following.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

2 Product Description

2.1 Design

The product consists of the following components:

2.2 Function

This product features microprocessor control of the stance and swing phase.
The microprocessor uses the measurements of an integrated sensor system as a basis to control
a hydraulic unit that influences the damping behaviour of the product.
These sensor data are updated and evaluated 100 times per second. As a result, the behaviour of
the product is adapted to the current motion situation (gait phase) dynamically and in real time.
Thanks to the microprocessor-controlled stance and swing phase, the system can be individually
adapted to your needs.
For this purpose, the product is adjusted by qualified personnel using adjustment software.
The product features MyModes for special motion types (e.g. cross-country skiing, ...). These are
pre-configured by the prosthetist using the adjustment software and can be activated with special
motion patterns, the cockpit app and the remote control (optional accessory) (see Page 56).
In case of a system malfunction, safety mode makes restricted operation possible. Predefined
resistance parameters are configured in the product for this purpose (see Page 61).
1. Proximal pyramid adapter
2. LED (blue) as indicator for the Bluetooth
connection
3. Battery and cover caps
4. Optional flexion stop (8°)
5. Hydraulic unit
6. Charging receptacle cover
7. Charging receptacle
8. Pylon stop
9. Distal tube clamp screws
Ottobock | 39