Technical Specifications; Warranty; Disposal Information; Disposing Of Consumables - Kulzer Dynamix speed Instrucciones De Uso

Error
Advance stops for no appa-
rent reason and the unit
performs a short relief stroke
Advance stops for no
apparent reason and the
pressure discs return to
their home position
The mixing program LEDs are
flashing while the unit cover
is open
GB
10

Technical Specifications

- 10 -
Mains voltage:
Protection class:
Power consumption:
Mains input fuse:
Dimensions (height x width x length): 330 x 190 x 380 mm (13 x 7.5 x 15 inches)
Weight (empty):
Noise level:
11

Warranty

Provided the unit is properly used, Kulzer warrants all the components of the
Dynamix speed mixing unit for a period of 2 years.
Warranty claims may only be made upon presentation of the original sales receipt.
Components subject to natural wear (e.g. motor and gears) as well as consumables (e.g. fuses, plungers' disc and unit cover)
are excluded from this warranty.
The warranty is voided in case of improper use; failure to observe the operating, cleaning, maintenance and connection
instructions; in case of independent repairs or repairs by unauthorized personnel; if spare parts from other manufacturers are
employed, or in case of unusual influences or influences not in compliance with the instructions for use, as well as in case of
modifications to the unit.
Warranty work on individual components shall not extend the original warranty of the overall unit.
We reserve the right to make technical changes.
12

Disposal Information

121

Disposing of Consumables

Empty cartridges and tubular bags as well as used mixing nozzles must be disposed of in accordance with the manufacturer's
instructions.
122

Instrument Disposal

The instrument must be disposed of by a specialist facility.

1221 Disposal Information for EU Nations

In order to maintain and protect the environment, to prevent environmental contamination and to improve the reutilization of
raw materials (recycling), the European Commission has established guidelines according to which manufacturers must take
back electrical and electronic devices in order to forward them to a regulated disposal or recycling system.
Within the European Union, devices identified with this symbol may therefore not be disposed of with unsorted
municipal solid waste:
For more information regarding proper disposal please apply at your local authorities.
We reserve the right to make technical changes.
Cause
• Material has hardened in the cartridge.
• The controller has detected an overload.
• Material has hardened in the cartridge.
• Insufficient spindle lubrication.
• No mixing program is selected.
230 V, 50 Hz
120 V, 60 Hz
100 V, 50/60 Hz
Class I (one)
280 VA
2 x 1.6 A (T) (230 V) to SN: A1346932
2 x 2.0 A (T) (230 V) from SN: A1346933
2 x 3.15 A (T) (100 V / 120 V)
7.0 kg
< 70 dB(A)
Corrective action
• Use new mixing nozzle.
• Impression material is too cold. Refer to the
manufacturer's processing instructions or handle
the impression material with a room temperature
between 21 – 25°C [70 – 77°F].
• Use a new cartridge.
• Lubricate the spindles.
• Select the correct mixing program for the impression
material (see section 5.1.1).
Dated: 2019-04