Introduction; Symbols - Kulzer Dynamix speed Instrucciones De Uso

1

Introduction

11

Symbols

The following symbols are employed in these instructions and on the unit itself:
On the unit:
In these instructions:
"Danger"
GB
Electrical current
- 2 -
Attention
Note
Please observe the
operating time
• Required actions, correct order
○ Reaction
– Listing
Other symbols are explained as they occur.
Adhere to the instructions for use!
Serious risk of injury!
This indicates a hazard due to electrical current!
Failure to observe the associated information can result in damage to the unit.
This provides the operator with useful information to make working with the
unit easier.
After 2 minutes of operation, you must pause for at least 5 minutes.
Please observe a pause of 2 hours after the extrusion of 3 complete cartridges
(approx. 30 impressions with a medium-size tray) in immediate succession.
During the pause the device can remain switched on.
The unit complies with current EU directives.
Within the EU, this device is subject to the provisions of the WEEE directive.