Corghi EM 9580 Manual De Uso página 52

M
S
- connect the signal cable and the power supply
cable to the rear monitor panel (B,C fig.6).
52
V A
5
6
Wheel guard and related
support mounting procedure
- Mount the bush (A, fig. 7) on the rotation pin
(B, fig. 7). While doing this, make sure that the
groove on the pin is aligned with the plug in
the bush.
- Block the bush on the pin using the M12 screw
(A, fig.7a) supplied with the machine.
- Block the connecting rod (B, fig. 7a) to the
machine casing using the special M10 screw
(C, fig.7a) supplied with the machine.
- fix the metal pipe (A, fig.7b) to the pin (B, fig.7b)
using the two M10 screws (C, fig.7b) supplied
with the machine.
EM 9580 - Operator's manual
7
7a