Corghi EM 9580 Manual De Uso página 53

- Insert the metal tube (D, fig. 8) into the two
plastic guard front holes (C, fig. 8).
- Couple the guard to the rear side of the tube
by inserting it into the correct position with
snap-on coupling (E, fig. 8).
- Lock the guard by tightening the screw F
(fig. 8).
EM 9580 - Operator's manual
Assembly of the ultrasonic
sensor and its "optional
accessory supplied on request"
support for automatic width
- insert the ultrasonic sensor cable inside the
slots in the metal pipe (see fig.9) fixing the
cable using the supplied hose clamp (A, fig.9)
7b
- fix the ultrasonic sensor support to the guard
pipe using the supplied screws (Fig.9a);
8
- connect the sensor cable to the connector on
the side of the casing (A, fig.9b)
measurement
9
UK
9a
53