Home Display; Symbol Description; Startup Guide - Grundfos CRE Instrucciones De Instalación Y Operación

6.2.1 Home display

Fig. 36 Example of "Home" display
Pos. Symbol Description
"Home"
This menu shows up to four user-defined
parameters. You can select parameters
1 shown as shortcut icon
pressing
"Settings" display for the selected
parameter.
"Status"
This menu shows the status of the pump
2 -
and system as well as warnings and
alarms.
"Settings"
This menu gives access to all setting
3 - parameters. You can make detailed
settings of the pump in this menu.
See section
"Assist"
This menu enables assisted pump setup,
4 - provides a short description of the control
modes and offers fault advice.
See section
This symbol indicates that the pump has
5
been stopped via the
This symbol indicates that the pump is
6 functioning as master pump in a multipump
system.
This symbol indicates that the pump is
7 functioning as a slave pump in a multipump
system.
This symbol indicates that the pump is
operating in a multipump system. See
8
section 7.44 "Multi-pump setup" ("Setup of
multi-pump
This symbol indicates that the possibility to
make settings has been disabled for
9 protective reasons. See section
7.29 "Buttons on product" ("Enable/disable
settings").

6.2.2 Startup guide

The pump incorporates a startup guide which is started at the first
startup. See section 7.37 "Run start-up
guide, the main menus appear in the display.
24
, and when
you go directly to the
7. Description of functions.
7.40 "Assist".
button.
system").
guide". After the startup