Technical Data; Scope Of Delivery; Technical Design; Description - SATA jet 1000 ROB RP Instrucciones De Servicio

for use with foodstuffs or for appli-
cation of unsuitable materials such
as acids or bases.
4.

Technical Data

See attached technical data sheet
for technical data and dimensions.
5.

Scope of Delivery

■ Automatic gun with selected nozzle
set
■ Tool kit
6.

Technical Design

The automatic gun has a variety of
features, depending on the version:
■ Nozzle head with optional material
circulation [1-5] or nozzle head with
material circulation [1-8].
■ End cap [1-2] or material flow control
[1-6].
All instructions apply to the "nozzle
head with optional material circula-
tion" [1-5] and end cap [1-2] variant.
The instructions should be carried
out the same way for all variants.
Any deviation from these instruc-
tions will be mentioned separately
in this document.
Automatic gun
[1-1] Locating hole with groove
for mounting pin
[1-2] Closing cap
[1-3] Inspection hole end cap
[1-4] Spray gun body (control
part)
[1-5] Nozzle head with optional
material circulation
Operating Instructions for SATA ROB Automatic Guns
[1-6] Material flow control
[1-7] Inspection hole for material
[1-8] Nozzle head with material
[1-9] Nozzle set
[1-10] Material connection for
[1-11] Gun body inspection hole
[1-12] Flat fan air connection (B)
[1-13] Round fan air connection
[1-14] Material connection, inlet
[1-15] Material connection, return
[1-16] Material connection
[1-17] Control air connection
Tool kit
[2-1] Extraction tool
[2-2] Cleaning brush
[2-3] Socket wrench (7 mm)
[2-4] Allen wrench (4 mm)
[2-5] Universal wrench
7.
The automatic gun consists of two
primary components: the nozzle
head and gun body.
Nozzle head
■ Nozzle head [1-5] (rotates in incre-
■ Air nozzle (adjustable in increments
■ Paint nozzle
■ Material connection [1-16]
Spray gun body
■ Gun body [1-4]
flow control
circulation
material circulation (plugged
at factory)
(R)

Description

ments of 90°)
of 45°, SATAminijet infinitely adjust-
able)
US
415