Explanations Of The Control Panel - Unold 68415 Instrucciones De Uso

DE
7. Close the lid of the Backmeister
8. Connect the plug of the appliance to the wall socket
EN
and switch the appliance on using the EIN/AUS (I/O)
FR
switch.
NL
9. Select the desired programme. You may find the details
for the different programmes from page 39 onwards.
IT
For a standard bread mix you will obtain good results
ES
using the programme „Basis" for example.
PL
10. Select the desired browning setting (Hell – Mittel –
Dunkel) (Light – Medium – Dark). Please bear in mind
CZ
that the browning setting cannot be selected in all
baking programmes. You may find the corresponding
details on page 40.
11. Select the desired bread size. Please bear in mind that
the bread size cannot be selected in all baking pro-
grammes. You may find the corresponding details on
page 40.
12. After having selected all desired adjustments, push
the START/STOPP button. For safety reasons, this but-
ton responds with a slight delay; therefore, keep the but-
ton pressed until you hear a beep tone.
13. According to the programme selected a repeated beep
can be heard during the second kneading process.
Now you may open the lid and add the desired ingre-
dients like nuts to the dough. Close the lid afterwards.
14. The Backmeister
when your bread is ready and can be taken out. If you
want to take the bread out before the temperature
maintenance time is over, push the START/STOPP
button and keep it pressed shortly until the interrup-
tion of the programme is confirmed with a beep.

EXPLANATIONS OF THE CONTROL PANEL

38 von 196
breadmaker.
®
breadmaker emits a repeated beep
®
Copyright UNOLD AG | www.unold.de
15. Carefully take out the bread pan. In order to avoid
burns, please use adequate pot holders. Turn the
bread pan upside-down and let the bread slip onto a
cake cooler to cool down. If the bread does not slip out
immediately onto the cake cooler, move the kneading
drive slightly from one side to another from the bottom
until the bread comes out. Please remember that the
kneading drive may still be hot and use adequate pot
holders. Never knock the bread pan on an edge or the
working plate, as this may deform the bread pan.
16. If the kneader sticks to the bread, it may be loosened
with the provided hook. Insert the hook on the bottom
side of the warm bread in the opening of the kneader
and twist it at the bottom rim of the kneader where
the blade is. Then pull the kneader carefully upwards
using the hook. This allows you to see where the blade
of the kneader is inside the bread and pull it out.
17. Clean the bread pan afterwards as described on page
43.
CAUTION:
The appliance becomes very hot
during operation.
BASIC SETTING
As soon as the plug is inserted in the socket, the display
shows 3:00 - (the figures do not flash). The arrow points
to the programme BASIS, ST. II (Basic, Size II) and crust
level MITTEL (Medium).
During operation the programme stage can be read from
the time-remaining clock as well as from the details on the
display.
Stand 21.2.2020