SICE S 1000 Manual De Instrucciones página 105

Avoid Personal Injury. Carefully read, understand and follow the warnings and instructions given
in this manual. This manual is an essential part of the product. Keep it with the machine in a safe
place for future reference.
4. Never exceed the inflation pressure for the tyre indicated by
the manufacturer on the side of the tyre itself.
Check that the air line is connected securely to the inflation valve.
5. Never place your head or any part of your body over a tyre dur-
ing the inflation process or when attempting to seat beads. This
machine is not intended to be a restraining device for exploding
tyres, tubes or rims.
6. Always stand back from the tyre changer when inflating, never
lean over.
An exploding tyre and rim may be propelled upward and outward with enough force to cause
serious injury or death.
Never mount any tyre unless the tyre size (molded into the sidewall) matches the rim size (stamped
into the rim) exactly or if the rim or tyre are defective.
Do not exceed the pressure recommended by the tyre manufacturer.
Using the tyre changer does not prevent the risk of tyre explosion or rim failure. Keep all persons
not working on the machine out of the working area.
7. Crushing hazard. Presence of moving parts. Contact with moving parts could result in an accident.
• Only one operator may work with the machine at a time.
• Keep other people away from the tyre changer.
• Keep hands and fingers clear of rim edge during the demounting and
mounting process.
• Keep hands and fingers clear of mount/demount head during operation.
• Keep your hands and other body parts away from moving parts.
• Do not use tools other than those supplied with tyre changer.
• Use lubricant that is specific for tyres in order to prevent tyre seizure.
8. Hazard of electric shock.
• Do not clean the electric parts with water or high pressure air jets.
• Do not operate the machine with a damaged power cord.
• If an extension cord is necessary, a cord with a current rating equal to or
greater than that of the machine must be used. Cords rated for less current
than the machine can overheat, resulting in a fire.
User manual S 1000
CAUTION!
DANGER
UK
105