Scheduled Maintenance - SICE S 1000 Manual De Instrucciones

Ocultar thumbs Ver también para S 1000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SCHEDULED MAINTENANCE:

- Periodically check the level in the hydraulic power
unit. The tank is made out of transparent plastic
and is located inside the protective casing (fig. 51).
Proceed as follows:
- unscrew the 4 screws on the casing;
- check that the oil level in the tank is between the
MINIMUM and MAXIMUM arrows (fig. 51a);
- if necessary, unscrew the tank plug and top up
using Esso NUTO H 46 hydraulic oil or equivalent
(e.g: AGIP OSO 46, SHELL TELLUS OIL 46, MOBIL
DTE 25, CASTROL HYSPIN AWS 46, CHEVRON
RPM EP HYDRAULIC OIL 46, BP ENERGOL HLP);
- retighten the tank plug and remove the protective
casing.
- Make sure the condensation is draining from
the filter-regulator unit:
The regulating filter unit is equipped with a semi-
automatic device to drain the condensate. This
device is automatically activated whenever pneu-
matic supply to the machine is cut off. Drain the
condensate manually (1, Fig. 51b) when the level
rises above level 2, Fig. 51b.
To carry out every month
166
51
2
1
User manual S 1000
51a
51b
51c

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido