SICE S 1000 Manual De Instrucciones página 126

- Place the wheel on the turntable spindle and lower the lift by operating the
pedal (Fig. 16c).
- Making sure that the mobile pin is inserted in one
of the fastening bolt holes (see Fig. 16d).
- fit the cone on the handle, using the extension
if necessary (see table for using centring and
clamping accessories in relation to wheel type
in this manual)
- fit the handle (a) in the centre hole and turn
clockwise fully (Fig. 16e).
CRUSH HAZARD POINT - MOVING PARTS, Risk of crushing injury.
Keep hands away from the handle or cone during clamping
See the section "TABLE FOR USING CENTRING AND CLAMPING ACCESSORIES ACCORD-
ING TO RIM TYPE" in this manual.
- Operate the pedal
When working with easily damaged wheels (wheels with a central hole with thin, protrud-
ing edges - see Fig. 17), we recommend using the universal flange for blind rims, P/N
126
16c
CAUTION!
CAUTION!
to clamp the wheel.
16d
16e
User manual S 1000