Blackmagic Design Video Assist Manual De Instalación Y Funcionamiento página 28

Zoom
The zoom feature lets you zoom into your image so you can carefully check your focus when
connected to a camera, or study fine details in your video image. The zoom feature can be
used when framing a shot before and during recording and playback.
On some models, simply double tap the screen to zoom in. The zoom window will appear in the
upper left hand corner of the display. Touch and drag the screen to view different areas of the
image. To return to the normal display, double tap the screen again. On other models, tap the
screen once to reveal the zoom icon in the top right corner. It will highlight blue when selected.
Zoom status indicator on Blackmagic Video Assist 12G HDR
Display Histogram
The left side of the on screen meters displays a histogram showing the distribution of the
luminance in your video. Pure black is on the far left side of the display and pure white is on the
far right of the display. When the video signal sharpens to a point at the bottom edges within
these limits you'll know your shadows and highlights are not clipping, which means details in
the tonal ranges of your video are preserved.
Storage Indicators
Displays the status of the storage media. Blackmagic Video Assist supports up to
2 SD card slots. 12G models also include an external drive.
To select a card to record to:
1 Tap the 'card' status icon to open the storage settings.
2 In the storage settings select the card you wish to record to.
3 Press 'exit' or the arrow to leave the storage settings page.
On 12G models you can toggle the
display histogram on or off via the
setup tab of the dashboard menu.
Changing Settings 28