Corghi A 222 Manual De Uso página 83

3
2
5
1
4
Assemble the different parts of the machine:
- Remove the side cover (Fig. 4a).
4a
4a
- Insert the air hose G fig.5 into hole A behind the tower tilt cylinder.
- Assemble the tower 1, insert pin B into hole C and lock with screw and washer D.
- Insert pin E into hole F and into U-bolt F1 on the tower tilt cylinder and lock with ring M.
- Connect hose G to the intermediate connection linked to the tower-lifting cock H.
- Fit the box with pressure gauge 3 on to the tower 1.
- Fit the tower guard 2 and lock with screws and washers L.
- Insert the tank 4 outlet into hose Q. Fix the tank 4 to the machine with nuts and washers
21
Operator's manual A 222 83