To improvethe operation of the tubeless tyre inflation system the compressed air
line pressure must be between 8/10 bar.
- Detach the wheel from the grippers (fig. 33).
- Press the inflation pedal
Check the pressure gauge frequently to ensure that the pressure NEVER exceeds the
maximum pressure specified by the tyre manufacturer.
Explosion hazard. Do not exceed the manufacturer's maximum pressure as stated
on the sidewall of the tyre when seating beads.
Reinstall valve stem core into the valve stem after beads have been seated, and then
inflate tire to vehicle manufacturer recommended pressure.
Activate air inflation jets only when sealing the bead. Do not point jets towards people.
Bleed air pressure from system before disconnecting supply line or other pneumatic
components. Air is stored in a reservoir for operation of inflation jets.
Only activate the air inflation jets if the rim securing device is locked in place and
the tire is properly clamped.
104
31
NOTICE
in the intermediate position to inflate the tyre.
WARNING
WARNING
WARNING
Q
Operator's manual A 222
32