Handling - Maschio GASPARDO COMPAGNA 1300 Empleo Y Mantenimiento

ENGLISH

3.3 HANDLING

The Customer must apply the rules envisaged in the European Directives EEC 391/89 and 269/90 and subsequent modifi cations
on the possible risks for loading and unloading operators caused by manual handling of loads.
During handling operations wear suitable personal protection equipment:
If the machine needs to be handled, hook it up to the supplied attachments (Fig. 6) and lift it using a lifting device of suitable capacity. Because
of the danger involved, this operation should be carried out by trained and responsible personnel. The mass of the machine is on the iden-
tifi cation Plate (Fig. 1). The hook points can be detected by fi nding the «hook» symbol (5, Fig. 4). Adjust the length of the belts to make
the machine level during lifting operations.
LIFTING THE SEED DRILL ONLY (Fig. 6)
The belt lengths shown are merely for indication.
Adjust the length of the belts to make the machine level during lifting operations.
Model L1 L2
(cm) (cm)
DAMA 250 215 270
DAMA 300 215 280
DAMA 350 215 295
DAMA 400 215 310
L2
62
USE AND MAINTENANCE
ATTENTION
Overalls Gloves
fi g. 6
L1 L2
Shoes Hardhat
L2 L1 L2
cod. F07010993