KPS Multicheck6010 Manual De Usuario página 84

Multicheck6010
Step 4 Check for any warnings and the online voltage/terminal monitor on the display before
starting the measurement. If everything is ok and the
After performing the measurement, the results appear on the display together with the After performing the measurement, the results appear on the display together with the
or indication (if applicable).
Figure 4 41: Example of specific earth resistance measurement results
Displayed results:
Ro Specific earth resistance
Rs Resistance of S (potential) probe
Rh
Resistance of H (current) probe
Notes:
• If a voltage of higher than 10 V exists between test terminals, the Earth Resistance measurement
will not be performed.
Figure 4 40: Connection diagram
- 84 -
is shown, press the TEST key.
EN