Recalling Results; Deleting Results - KPS Multicheck6010 Manual De Usuario

Multicheck6010
To cancel the saving of the record press MEM or Exit/Back/Return key instead of TEST, the last
measurement screen is then shown.
Step 5 Press the MEM or Exit/Back/Return key to return to last measurement screen or the
▲▼ navigation keys to see a record from the list.

7.2 Recalling results

Step 1 To enter the Memory screen press the MEM key.
When no measurement was made, the last record is directly shown.
When a measurement was made, a screen as in figure 7.2 is shown. Press then the
UP or DOWN key to enter the record list.
It is possible to change the IDs of an existing record. Press the LEFT key to enter the ID editor,
change the IDs and save it. These IDs will not be used for the following new records.

7.3 Deleting results

Step 1 To enter the Memory screen press the MEM key.
When no measurement was made, the last record is directly shown.
When a measurement was made, a screen as in figure 7.2 is shown. Press then the
UP or DOWN key to enter the record list.
Step 2 Press the UP or DOWN key to find the record that has to be deleted.
Step 3 Press the RIGHT key, the following screen will be displayed (Figure 7.6).
Figure 7.5: Failed result
Figure 7.6: Delete screen
- 95 -
EN