Inserting Credit Cards; Inserting A Cd; Clearing A Material Blockage; Turning Off The Appliance - UNITED OFFICE UAV 250 A2 Instrucciones De Uso

Inserting credit cards

■ Insert the credit card from above into the middle of the CD/credit card cutter
opening 5 . You can only shred one credit card at a time . Always insert the
card into the CD/credit card cutter opening 5 with the wide side first .
Otherwise, the magnetic strip will not be destroyed .
NOTE
► Always insert the credit card into the middle of the CD/credit card cutter
opening 5 . Otherwise, the shredding process will not start!
NOTE
► If the shredding process does not start when you insert the credit card, care-
fully push the credit card further into the CD/credit card cutter opening 5
with a flat object .
NOTE
► If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper 6 .
Note that the residue will then fall into the large waste container 4 .
If necessary, empty this beforehand in order to keep paper and plastic
waste separate .

Inserting a CD

WARNING! RISK OF INJURY!
► Never insert your finger into the central hole of a CD when you are feeding
it into the appliance .
■ Insert the CD from above into the middle of the CD/credit card cutter
opening 5 . You can only shred one CD at a time .

Clearing a material blockage

1) Move the switch 9 to the "REV" ("reverse") position if the paper being
shredded causes a blockage . The appliance now goes into reverse and
the paper that is being shredded is ejected .
2) Move the switch 9 to the "OFF" position as soon as the jammed material
has been ejected .

Turning off the appliance

■ Switch the appliance off by moving the switch 9 to the position "OFF" . The
"Power" lamp 7 goes out .
UAV 250 A2 19 ■
GB │ IE
│