Inserting credit cards
■
Insert the credit card from above into the middle of the CD/credit card cutter
opening
card into the CD/credit card cutter opening
Otherwise, the magnetic strip will not be destroyed.
NOTE
►
Always insert the credit card into the middle of the CD/credit card cutter
opening
NOTE
►
If the shredding process does not start when you insert the credit card, care-
fully push the credit card further into the CD/credit card cutter opening
with a flat object.
NOTE
►
If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper
Note that the residue will then fall into the large waste container
If necessary, empty this beforehand in order to keep paper and plastic
waste separate.
Inserting a CD
WARNING! RISK OF INJURY!
►
Never insert your finger into the central hole of a CD when you are feeding
it into the appliance.
■
Insert the CD from above into the middle of the CD/credit card cutter
opening
Clearing a material blockage
1) Move the switch
shredded causes a blockage. The appliance now goes into reverse and
the paper that is being shredded is ejected.
2) Move the switch
has been ejected.
Turning off the appliance
■
Switch the appliance off by moving the switch
UAV 250 A1
. You can only shred one credit card at a time. Always insert the
. Otherwise, the shredding process will not start!
.
. You can only shred one CD at a time.
to the "REV" ("reverse") position if the paper being
to the "OFF" position as soon as the jammed material
with the wide side first.
.
to the position "OFF".
GB │ IE
19
│
■