The Helmet; Standard; Ece Approval; Anatomy Of The Helmet - SCHUBERTH SR 1 Manual De Instrucciones

C. THE HELMET

1. STANDARD

The SR1 satisfi es the ECE-R 22.05 standard. This testing standard
guarantees adherence to defi ned safety standards concerning
shock absorption, visor, retention system and the fi eld of vision.
This approval both permits you to use the helmet in the EU
member states and in all countries that recognise the ECE standard
and provides the insurance conformity that is important in the
event of an accident. Please note that this SR1 model with ECE
approval is specially designed for the ECE standard and is therefore
not intended to be used in the USA, Canada or other non-EU
countries. It may only be legal for use in countries in which the ECE
standard holds validity.
Note: For use in the USA, Canada and other non-EU
countries, only SCHUBERTH helmets may be worn that have
the appropriate authorisation and technical specifi cation for
that region and purpose.
For further information on such helmets and where to obtain
them, please visit our website at:
www.schuberth.com/us/home
2. ECE-APPROVAL
ECE inspection standard
Authorisation number
059268/P-346
52
Authorisation authority
Serial number

3. ANATOMY OF THE HELMET

Visor
Internal lining
Breath defl ector
Air exit from head
Visor ventilation
2-way chin
ventilation
Wind defl ector

4. OUTER SHELL

The outer shell of the SR1 combines an aerodynamically optimised
shape with effective protection. It consists of a special fi breglass-
reinforced duroplastic woven material developed by SCHUBERTH
that provides the strength necessary for maximum protection.
Warning: This helmet is designed to protect from only one
shock or impact. After any fall, accident or other forceful
impact the helmet must be replaced.

5. INNER SHELL

The inner shell of the helmet is constructed of multiple parts to
optimise shock absorption. A complex arrangement of EPS densities
in multiple zones allows force to be absorbed and distributed
more effectively to maximize safety. The large side parts allow the
helmet to sit comfortably in its optimum position.
Head ventilation
Inner shell
Outer shell
Visor mechanism
(push-release system)
Retaining system
(anti-roll-off system)
Visor regulation/visor
locking/urban
Noise-reduction system
(N.R.S.)
Chin strap
(with double-D fastener)
53