Installation Instructions; Model Numbers; Ice Deflector; Bin Installation - Motak PKU0155SA Manual De Instrucciones

Model Numbers

This manual covers the following models:
• PKU0155SA - Small Cube, Air-cooled, Undercounter Model
• PKU0155FA - Full Cube, Air-cooled, Undercounter Model
• PKM0335SA - Small Cube, Air-cooled, Modular Model
• PKM0335FA - Full Cube, Air-cooled, Modular Model
• PKM0425SA - Small Cube, Air-cooled, Modular Model
• PKM0425FA - Full Cube, Air-cooled, Modular Model
• PKM0535SA - Small Cube, Air-cooled, Modular Model
• PKM0535FA - Full Cube, Air-cooled, Modular Model
• PKB0425 - 22" Wide Modular Bin
• PKB0535 - 30" Wide Modular Bin

Ice Deflector

An ice deflector is required when the ice machine is installed on a dispenser.

Bin Installation

• Bins have a deflector installed and require no modifications when used with a forward
facing evaporator.
• Install legs by threading into base of bin.
• Align sides and back of ice machine with sides and back of bin, when placing ice
machine on bin.
• Install separate drain for bin and ice machine see "Drain Connections" on page 18.
NOTE: These products are hermetically sealed and contain fluorinated greenhouse gas
R410A.
Part Number: 000016426 Rev 00 08/2020
Section 1

Installation Instructions

11