Motak PKU0155SA Manual De Instrucciones página 35

Section 3 Cleaning and Sanitation
Step 11 Use 1/2 of the sanitizer/water solution to sanitize all foodzone surfaces of the ice
machine and bin (or dispenser). Use a spray bottle to liberally apply the solution. When
sanitizing, pay particular attention to the following areas:
• Evaporator plastic parts - including top, bottom and sides
• Ice machine base (top of bin) and area above the water trough
• Bin sides and bottom
Do not rinse the sanitized areas.
Step 12 Replace all removed components.
Step 13 Wait 20 minutes.
Step 14 Reapply power to the ice machine and place the toggle switch in the CLEAN or
WASH position.
Step 15 Wait until the water trough refills, then add the proper amount of Manitowoc Ice
Machine Sanitizer to the water trough.
Model Amount of Sanitizer
PKU0155 2.2 ounces (66 ml)
PKM0335/PKM0425/PKM0535 3 ounces (90 ml)
Step 16 After the sanitize cycle is complete move the toggle switch to the ICE position to
start ice making.
Part Number: 000016426 Rev 00 08/2020 35