Detailed Descaling And Sanitizing Procedure - Motak PKU0155SA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section 3

Detailed Descaling and Sanitizing Procedure

Ice machine descaler is used to remove lime scale and mineral deposits. Ice machine
sanitizer disinfects and removes algae and slime.
Step 1
Remove/open the front door to access the evaporator compartment. Ice must
not be on the evaporator during the descaling and sanitizing cycle. Set the toggle switch to
the OFF position after ice falls from the evaporator at the end of a harvest cycle. Or, set the
switch to OFF and allow the ice to melt off the evaporator(s).

Notice
Never use anything to force ice from the evaporator. Damage may result.
Step 2
Remove all ice from the bin.
Step 3
Place the toggle switch in the CLEAN or WASH position. Water will flow through
the water dump valve and down the drain. Wait until the water trough refills, then add the
proper amount of ice machine descaler.
PKU0155
PKM0335/PKM0425/PKM0535
Part Number: 000016426 Rev 00 08/2020
Model
Cleaning and Sanitation
Amount of Descaler
2 ounces (60 ml)
5 ounces (150 ml)
33

Publicidad

Tabla de contenido
loading

Productos relacionados para Motak PKU0155SA

Tabla de contenido