Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section 3
Cleaning the Condenser Filter
The washable filter is designed to catch dust, dirt, lint and grease. Clean the filter with a
mild soap and water.
Cleaning the Condenser
Warning
n
Disconnect electric power to the ice machine head section at the electric service
switches before cleaning the condenser.
A dirty condenser restricts airflow, resulting in excessively high operating temperatures.
This reduces ice production and shortens component life.
• Clean the condenser at least every six months.
Warning
n
The condenser fins are sharp. Use care when cleaning them.
• Shine a flashlight through the condenser to check for dirt between the fins.
• Blow compressed air or rinse with water from the inside out (opposite direction of
airflow).
• If dirt still remains call a service agent to clean the condenser.
Removal from Service/Winterization
1.
Descale and sanitize the ice machine.
2.
Move the toggle switch to the OFF position and turn off the ice machine.
3.
Turn off the water supply, disconnect and drain the incoming ice-making water line at
the rear of the ice machine and drain the water trough.
4.
Blow with compressed air to remove water from ice machine:
• PKM0335/PKM0425/PKM0535 - Energize the ice machine, wait one minute for the
water inlet valve to open and blow compressed air in both the incoming water and
the drain openings in the rear of the ice machine to remove all water.
• PKU0155 - Blow compressed air in both the incoming water and the drain openings
in the rear of the ice machine to remove all water.
5.
Move the toggle switch to the OFF position and turn off the ice machine. Disconnect
the electric power at the circuit breaker or the electric service switch.
6.
Fill spray bottle with sanitizer/water solution and spray all interior food zone surfaces.
Do not rinse and allow to air dry.
7.
Replace all panels.
Part Number: 000016426 Rev 00 08/2020
Cleaning and Sanitation
41
Publicidad
Capítulos
Tabla de contenido
