Wiring Diagrams; Standard Maintenance; Water Drainage; Yearly Maintenance - Hitecsa RCAH RCF Serie Manual De Instalación, Operación Y Mantenimiento

6 – W
D
IRING IAGRAMS
Follow the instructions contained in the specific documentation (electrical wiring diagrams and controller manual) supplied together
with this manual and the unit.
7 – S
M
TANDARD
BEFORE SERVICING THE UNIT, SHUT DOWN THE MAIN POWER SUPPLY.
•
It is the responsibility of the User to carry out all types of maintenance operations.
•
Only personnel previously trained and qualified may carry out maintenance operations.
•
Should the unit require disassembly, hand protection is required.
Monthly maintenance
Air filters
Filter section can be accessed through side removable panel as well as bottom turnable panel; following figure 8, in the first case,
filter removal is done by dismounting the side filter frame 1, in the second case, by dismounting the bottom filter frame 2.
For the cleaning, use a vacuum cleaner or wash with normal detergent and warm water, allow to dry well. Remember to assemble the
filter before operating the unit; replace a new filter after max 3 cleaning cycles. In case of F6 compact filter (option), replace it when
dirty.

Water drainage

By fan service panel, clean, if necessary, the dirt and impurities that have formed in the condensation tray. Also check the efficiency
of the traps.

Yearly maintenance

Check that all the electrical equipment, in particular the fixing of the electrical connections.
Check the tightness of all nut, bolts, flanges and hydraulic connections that the vibrations of the machine may have loosened.
In order to check the efficiency of compressor equipment, it is suggested to contact the local HITECSA service.
AINTENANCE
IOM_RCAH RCF_10a40_207695_190500_ES-IT-EN-FR-DE
7