Leroy-Somer Digidrive SK Serie Guía De Usuario página 60

Français
0-20: Current input 0 to 20mA (20mA full scale)
20-0: Current input 20 to 0mA (0mA full scale)
4-20: Current input 4 to 20mA with current loop loss (cL) trip (20mA full scale)
20-4: Current input 20 to 4mA with current loop loss (cL) trip (4mA full scale)
4-.20:Current input 4 to 20mA with no current loop loss (cL) trip (20mA full scale)
20-.4:Current input 20 to 4mA with no current loop loss (cL) trip (4mA full scale)
VoLt: 0 to 10V input
T3
+10V reference output
Maximum output current
T4
Analog input 2 (A2), either voltage or digital input
Voltage: Digital input
Scaling (as voltage input)
Resolution
Input impedance
Normal threshold voltage (as digital input) +10V (positive logic only)
T5 Status relay - Drive healthy (Normally open)
T6
Voltage rating
Current rating
Contact isolation
Operation of contact
Provide fuse or other over-current protection in status relay circuit.
WARNING
B1
Analog voltage output - Motor speed
Voltage output
Scaling
Maximum output current
Resolution
B2
+24V output
Maximum output current
B3
Digital output - Zero speed
Voltage range
Maximum output current
60
English Deutsch Italiano
5mA
0 to +10V: 0 to +24V
Input range automatically scaled to Pr 01 Minimum set
speed / Pr 02 Maximum set speed
0.1%
100kΩ (voltage): 6k8 (digital input)
240Vac/30Vdc
2A/6A (resistive)
1.5kVac (over voltage category II)
OPEN
AC supply removed from drive
AC supply applied to drive with drive in tripped condition
CLOSED
AC supply applied to drive with drive in a 'ready to run' or
'running' condition (not tripped)
0 to +10V
0V represents 0Hz/rpm output
+10V represents the value in Pr 02 Maximum set speed
5mA
0.1%
100mA
0 to +24V
50mA at +24V (current source)
Digidrive SK Getting Started Guide
Español
Issue Number: a