Keypad And Display; Programming Keys; Control Keys - Leroy-Somer Digidrive SK Serie Guía De Usuario

Français
5

Keypad and Display

The keypad and display are used for the following:
• Displaying the operating status of the drive
• Displaying a fault or trip code
• Reading and changing parameter values
• Stopping, starting and resetting the drive
Figure 5-1 Keypad and display
5.1

Programming keys

The MODE key is used to change the mode of operation of the drive.
M
The UP and
keypad mode, they are used to increase and decrease the speed of the motor.
5.2

Control keys

The START key is used to start the drive in keypad mode.
The STOP/RESET key is used to stop and reset the drive in keypad mode. It can
also be used to reset the drive in terminal mode.
62
English Deutsch
M
DOWN keys are used to select parameters and edit their values. In
Italiano
Digidrive SK Getting Started Guide
Issue Number: a
Español