3) Parameters
Note:
The
In CPAP mode
View of the display
In Bilevel mode
Views of the display
Press the right control button
Press the right control button
4) Patient reminders
This screen displays only when the physician or home care provider has set at least one
frequency for one type of reminder. Then, the reminder activation date is shown
opposite the corresponding reminder.
The display is the same whether the device is set to CPAP mode or Bilevel mode.
Note:
The
modified.
View of the display
Press the right control button
Sandman Duo/DuoST Patient Manual
symbol indicates that the values displayed on the page cannot be modified.
Prescribed P.: Level of pressure prescribed by your physician.
Pressure Alter: Feature enabled by the physician or home care provider
in order to change the prescribed pressure by ± 1 cmH
symbol indicates that the Pressure Alter feature is enabled, and the
symbol indicates that it is disabled.
Max ramp time: Maximum ramp time of from 0 to 45 minutes set by the
home care provider.
Max ramp time: Maximum ramp time of from 0 to 45 minutes set by the
home care provider.
EPAP: Set expiratory pressure (low-pressure setting for expiratory
positive airway pressure).
IPAP: Set inspiratory pressure (high-pressure setting for inspiratory
positive airway pressure).
to access the next page.
Press. Rise Time: Pressure rise time set by physician. Time the device
takes to rise from the expiratory positive airway pressure (EPAP) to the
inspiratory positive airway pressure (IPAP).
Inspi.
Sens.:
Inspiratory
sensitivity of the start of the inspiratory phase of respiration).
Expi. Sens.: Expiratory sensitivity set by physician (detection sensitivity
of the start of the expiratory phase of respiration).
to access the next page.
symbol indicates that the values displayed on the page cannot be
Filter: Provides a reminder of the date when the filter should be
changed.
Mask: Provides a reminder of the date when the mask should be
changed.
Service: Provides a reminder of the date when the device pressure
should be inspected.
Memory card: Provides a reminder of the date when the memory card
should be returned to the home care provider after retrieving the data.
to access the next page.
sensitivity
set
by
O. The
2
physician
(detection
US – 21