Maximum Speed (Max); Standby - Beta URBAN 125 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1

2.5 Maximum speed (MAX)

This function describes the operation/
display of the maximum speed function.
The information is displayed using digits
2-5 and the abbreviation MAX, as shown
in fi g.9.
The parameter identifi es the vehicle's
maximum speed reached, expressed in
Km/h or in mph, depending on the unit
of measurement selected.
The counter linked to this parameter can
be reset by pressing the button, near the
MAX function, for approx. 2 seconds,
until the value 00 appears.
MAX can be reset when the vehicle is
stopped or moving.
The value is reset when the unit of mea-
surement is changed.
The datum is not stored permanently.
Note: In the absence of mains
power, the MAX value is irretri-
evably lost.

2.6 Standby

In vehicles without a rev counter, the
standby function can be used to adjust
the clock (see parag. 2.8.1).
The information is displayed as in fi gure
10.
GB
Fig. 9
Fig. 10
20

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Urban 200

Tabla de contenido