Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• Fit the oil fi lter cover after fi tting the spring
and the O-ring, and then tighten the three
fastening nuts C.
•Fill in with the right amount of oil:
- Oil replacement
- With fi lter replacement
- Overhaul
•Close the inlet plug B again.dle for a
few minutes.
• Turn off the engine and wait for about
one minute, then check the level and top
up if needed, without exceeding the max
level shown on the window A.
Note
Renew the oil after the fi rst 1,000 km.
Subsequent renewals should be every
5,000 km 15 months, (refer to the table
on page 63). Always use the lubricants
shown on page 43.
The oil fi lter should be replaced for the fi rst
time when the oil is fi rst renewed, and sub-
sequently every 10,000 km (30 months).

IMPORTANT

Dispose of used oil in compliance with the
regulations in force.
850 ml
950 ml
1300 ml
49
3
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Urban 200

Tabla de contenido