Replacing The Rear Light Bulb - Beta URBAN 125 Manual Del Usuario

B
D

REPLACING THE REAR LIGHT BULB

To replace the back light unit A, proceed
as follows:
• Remove the plate holder as described
in the section, "Removal of body parts"
on page 60.
• Disconnect all electric connections.
• Loosen the two screws B under the
fender.
• Pull out the faulty light unit A and repla-
ce it with a new one.
• To fi t it all back in, proceed in reverse.
Note:
A
Any replacement lamp must meet the
same specifi cations as the original ones
(see section, "Light specifi cations", page
76).
C
REPLACING THE LICENCE PLATE BULBS
To replace the plate number light, proce-
ed as follows:
• Loosen the screw C.
• Remove the transparent screen D.
• Pull the faulty light out of the bulb and
replace with a new one.
• To fi t it all back in, proceed in reverse.
Note:
Any replacement lamp must meet the
same specifi cations as the original ones
(see section, "Light specifi cations", page
76).
75
5
GB